How to Make DIY Resin Rings

If you’ve never worked with resin before, I would categorize this project somewhere between beginner and intermediate. If you have the right molds it would be a beginner project, but the molds we used where tough to work with, so I was happy to have had some resin experience to handle the issues that came up.

The molds we used came from Amazon, were extremely difficult to pour into, and didn’t come with any instructions on fill lines, etc. So, if you’re a beginner, we’d recommend starting with a ring making kit that has all of the tools you need to be successful, as well as specific instructions for the molds you are using.

How do you make homemade resin rings?

Making resin rings almost feels like baking. You start by mixing the resin until it’s ready to pour, add in any embellishments or color, pour it into a mold and let it set. The hardest part is the waiting! I’m always dying to pop my resin creations out of their molds, but not giving them a full 24 hours can really result in disaster.

Once you have all of the right supplies on-hand, it’s so easy to make resin rings at home. And, since they are so small, you’ll have leftover supplies ready to go when you want to make more!

Supplies Needed to Make Resin Rings

For beginners:

• Resin Ring Making Kit

For intermediate makers:

• Mod Podge Resin
• Silicone Ring Molds
• Mika Powder
• Embellishments
• Disposable Cups
• Disposable tools for stirring (I use large popscile sticks or plastic utensils)
• Gloves
• Super Glue (if desired)

Step by step tutorial for DIY Resin Rings

Step 1. Begin by preparing your working surface. I will typically lay down a disposable tablecloth in my most ventilated room, gather my cups and tools for stirring, and make sure I have a timer for mixing the resin.

Step 2. Measure, pour, and mix the resin and hardener according to package directions. For ours this meant a 1:1 ratio, mixing consistently for three minutes. Mix gently to minimize bubbles.

Tip: a little resin goes a long way with rings, and once you add mika powder or other mix-ins it can start to activate the resin quickly. As a result, only mix enough for a few rings at a time instead of mixing it all. This way the resin won’t begin to set before you are ready to work with it.

Step 3. Once the resin is completely mixed, divide the resin into disposable cups according to the number of colors you’d like to make. Then, mix in mika powders to color the resin. Mix until completed combined.

Step 4. Carefully pour a minimal stream of resin into the ring molds. We found that it was helpful to do this in layers, filling a bit of the molds, giving it time to settle, them continuing to fill them. During this process you can also add in any embelishments you’d like such as foils, clay shapes, glitter, etc. Just incorporate those embellishments within the layers and be careful to ensure they are coated in the resin.

Tip: if the resin is having a difficult time settling in the molds you can help it along with a paper clip or other pointy device.

Step 5. Fill molds according to the designated fill line and let set for 24 hours or according to package directions.

Step 6. Once the resin is completely set, remove rings from the molds. They should be strong and hard by this point so it shouldn’t damage them to remove them from the molds.

Step 7. If desired, use super glue to embellish the tops of the rings with gems! Let dry completely before wearing.

Just as with any new method of crafting there is definitely a bit of trial and error that comes with resin, especially when you are working with smaller molds, but have patience, go slow, and the results will be so much fun!

To see the other projects we’ve made with resin, visit our resin archive right here. And feel free to send us a DM on Instagram if you have any questions or need tips!

How to Make DIY Resin Rings

Print

We have yet to come across a resin project we didn’t love and these DIY resin rings are no exception! With endless ways to make them your own, your hands are going to be more fun than ever!

Materials

• Mod Podge Resin
• Silicone Ring Molds
• Mika Powder
• Embellishments
• Disposable Cups
• Disposable tools for stirring (I use large popscile sticks or plastic utensils)
• Gloves
• Super Glue (if desired)

Instructions

1. Begin by preparing your working surface. I will typically lay down a disposable tablecloth in my most ventilated room, gather my cups and tools for stirring, and make sure I have a timer for mixing the resin. 
2. Measure, pour, and mix the resin and hardener according to package directions. For ours this meant a 1:1 ratio, mixing consistently for three minutes. Mix gently to minimize bubbles. 
3. Once the resin is completely mixed, divide the resin into disposable cups according to the number of colors you’d like to make. Then, mix in mika powders to color the resin. Mix until completed combined. 
4. Carefully pour a minimal stream of resin into the ring molds. We found that it was helpful to do this in layers, filling a bit of the molds, giving it time to settle, them continuing to fill them. During this process you can also add in any embelishments you’d like such as foils, clay shapes, glitter, etc. Just incorporate those embellishments within the layers and be careful to ensure they are coated in the resin. 
5. Fill molds according to the designated fill line and let set for 24 hours or according to package directions. 
6. Once the resin is completely set, remove rings from the molds. They should be strong and hard by this point so it shouldn’t damage them to remove them from the molds. 
7. If desired, use super glue to embellish the tops of the rings with gems! Let dry completely before wearing. 

Notes

1. A little resin goes a long way with rings, and once you add mika powder or other mix-ins it can start to activate the resin quickly. As a result, only mix enough for a few rings at a time instead of mixing it all. This way the resin won’t begin to set before you are ready to work with it. 
2. If the resin is having a difficult time settling in the molds you can help it along with a paper clip or other pointy device. 

Recommended Products

As an Amazon Associate and member of other affiliate programs, I earn from qualifying purchases.

• 
  AKOAK 2 Boxes of Crystal Mash Clay Strip Flowers Fruit Slices Apples, Strawberries, Watermelons Nail Crafts Making, Decorations Scrapbook DIY Crafts
• 
  HTVRONT Mica Powder for Epoxy Resin 130g - 26 Colors Shimmery Pigment Powder - Easy to Mix & Natural for Soap Making, Lip Gloss, Bath Bombs
• 
  Resin Ring Molds Silicone, Silicone for Epoxy Resin, 14 Sizes with Round and Rhombic Faces Making Rings, Earrings, Pendants, Crafts Christmas Gifts
• 
  Mod Podge 8 fl oz Hardener 2-Part Supplies Pack, Perfect Kits and Silicone Molds for Epoxy Resin Projects, 25263, Clear
• 
  Craft It Up Epoxy Resin Rings Kit for Beginners - 40+ Piece Set - Jewerly Making Kit for Kids and Adults - All in One Craft Set - DIY Rings Gift for Girls Boys Childen Adults

Happy Making!
-Liz

SAVE THIS POST FOR LATER!

The post How to Make DIY Resin Rings appeared first on The Pretty Life Girls.

How to Make Colored Glass at Home

If you have been to any home boutiques or scrolled through your favorite decor sites in the last year, it’s very likely that you have come across a shelf of chic, colorful, tinted glassware. From vases and candle holders to stemware and tumblers–this rainbow trend is a gorgeous way to bring color into your china cabinets and tabletops.

However, the price tag can make it difficult to take the plunge, which is why we knew we had to figure out a DIY version. 

Spoiler alert: we did it!!

How can you make DIY stained glass?

If you follow us on social media, you may remember the tutorial we shared last year for DIY colored glass candlesticks. This project was so much fun and one great method for tinting glass at home. However, the paint we used is Gallery Glass (an awesome paint meant for creating faux stained glass) that leaves a texture behind that mimics real stained glass.

And while we didn’t mind the texture at the time, since that post, the makers of Gallery Glass have released a new glass paint that tints glass without the texture, which turned out to be a MAJOR upgrade! 

Note: You can see our faux stained glass projects using Gallery Glass on this stained glass window project and this terrarium project! 

How to make tinted glass at home

The process for applying this glass paint is so simple–just brush it on! Then, once it is completely dry, the results are a lovely, colorful tint that looks straight out of a fancy boutique. No one will know this is DIY!

Supplies Needed to Make Colored Glass at Home

• FolkArt Murano Glass Paint
• FolkArt Murano Glass Paint Brushes
• Glassware (For this project we scoured our local thrift store for glass vases in all shapes and sizes and found so many good ones! Plus, they were SO affordable!) 

How to Make Colored Glass Jars and Vases

Watch us make them on Instagram by clicking here!

Step 1. Prep the glass

Clean the glass to remove any dust or oils. Let dry completely. 

Step 2: Apply the paint

Squeeze the paint directly on the outside of the glass. Using a paint brush, paint until smooth over the area you would like covered. Let dry completely. (The color will change quite a bit once dry so it’s important to let it try completely to determine if you would like another coat.) 

Step 3: Repeat

If you’d like a deeper/brighter color intensity, repeat step 2 and let dry completely. Repeat this process until you have reached your desired shade. 

Step 4: Let dry

Once painted and dry, enjoy!

Aren’t they lovely? The way the paint brought the glass to life is my favorite thing, and it couldn’t be easier to achieve! Just paint on and let dry. We love crafty innovation! 

So many possibilities for making with this method. What would you paint first?  

How to Make Colored Glass at Home

Print

Love the colored glass trend but don’t want to break the bank? Learn how to make colored glass at home with the best DIY dupe for tinting glass–perfect for vases, candlesticks, dishes and more! Keep reading for all the details!

Materials

• FolkArt Murano Glass Paint
• FolkArt Murano Glass Paint Brushes
• Glassware

Instructions

Step 1. Prep the glass

Clean the glass to remove any dust or oils. Let dry completely. 

Step 2: Apply the paint

Squeeze the paint directly on the outside of the glass. Using a paint brush, paint until smooth over the area you would like covered. Let dry completely. (The color will change quite a bit once dry so it’s important to let it try completely to determine if you would like another coat.) 

Step 3: Repeat

If you’d like a deeper/brighter color intensity, repeat step 2 and let dry completely. Repeat this process until you have reached your desired shade. 

Step 4: Let dry

Once painted and dry, enjoy!

Notes

The thrift store is a great place to find glass vases in all shapes and sizes at an affordable price!

Recommended Products

As an Amazon Associate and member of other affiliate programs, I earn from qualifying purchases.

• 
  FolkArt Murano Acrylic Craft Paint Kit, 15 Piece Set Including 5 Brushes and 10 Transparent Colors, PROMOMG24

Happy making!
ox. Liz and Sam

SAVE THIS POST FOR LATER!

The post How to Make Colored Glass at Home appeared first on The Pretty Life Girls.